Balancing A Wheel Type; Normal Balancing Mode; Truck Balancing Mode - Accu-Turn 1500 Manuel De L'opérateur

38
Operations
5.3.2
This chapter describes how to balance a wheel.
For help on:
rim data input
spinning the wheel refer to Chapter 5.3.3
weight application refer to Chapter 5.3.4
5.3.2.0-1
the check spin
5.3.2.0
When selected, the display will appear as Figure
5.3.2.0-1.
• Enter the dimensions (Chapter 5.3.1) and spin the
wheel.
• Apply the clip-on weights at the distance in
5.3.2.1-1
positions indicated by the illuminated weight application
lights, apply weights at the 12 o'clock position.
• Perform a check spin when done.
5.3.2.1
When selected, the display appears as in Figure
5.3.2.1-1 and the two LED continually blink to
differentiate this function from "Normal". The
programme will produce a reading of the unbalances
with increases of 10 in 10 if set in grams, of 0,5 in 0,5
in set ounces.
• Enter the dimensions (see chapter 5.3.1) and spin
the wheel.
• Apply the clip weights to the indicated positions, at
12 o'clock.
• When finished, perform a check spin.
Operator's Manual

Balancing a wheel type.

refer to Chapter 5.3.1
refer to Chapter 5.3.5

Normal balancing mode.

TRUCK balancing mode.

ACCU 1500