Trouble Shooting - Accu-Turn 1500 Manuel De L'opérateur

62

Trouble shooting

7 7 Trouble shooting. Trouble shooting.
If a problem with the wheel balancer appears, proceed If a problem with the wheel balancer occurs, proceed
in the following order to solve the problem: in the following order to solve the problem:
1. Rethink the last steps taken. 1. Rethink the last steps taken.
Did you work according to the manual? Did you work according to the manual?
Did the unit work as described and expected? Did the unit work as described and expected?
2. Check the unit according to the list in this chapter. 2. Check the unit according to the list in this chapter.
3. Call ACCU (800-551-2228) for technical service if 3. Call your local sales agent for technical service.
required.
The set up of this chapter is:
The format of this chapter is as follows: Problem
1. Possible cause #1 Problem
• Possible solution(s)
1. Possible cause #1
• Possible solution(s)
2. Possible cause #2
• Possible solution(s)
2. Possible cause #2
• Possible solution(s)
When switched on, nothing lights up. When switched on, nothing lights up.
1. No power cable connected. 1. No power cable connected.
• Connect power cable to the power outlet. • Connect power cable to the power outlet.
2. No mains current. 2. No current from power source.
• Check the current supply and the power system • Check the current supply and the power system
fuses. fuses.
3. Unit fuse(s) blown. 3. Unit fuse(s) blown.
• Replace the unit fuse(s). • Replace the unit fuse(s).
If the fuse(s) has (have) recently been substituted, If the fuse(s) has (have) recently been substituted,
call the service team to check the unit. call the service team to check the unit.
When switched on, a beep is heard for 1 second.
When switched on, a beep is heard for 1 second. 1. Configuration error.
• Call ACCU Service.
1. Configuration error.
• Call the Service team.
When switched on, the unit beeps with a certain
sequence.
• Note down the sequence.
When switched on, the unit beeps with a certain
• Call ACCU Service.
sequence.
• Note down the sequence.
Display appears to freeze or lock up.
• Call the Service team.
1. The unit may be in a program, waiting for a specific
action.
• Finish the program currently in use.
Display appears to freeze or lock up.
• Switch off the unit.
1. The unit may be in a program, waiting for a specific
action. Wait for 20 seconds, switch on the unit.
• Finish the program currently in use.
Proceed.
• Switch off the unit.
2. Power to the balancer may have been interrupted.
• Switch off the unit.
Wait for 20 seconds, switch on the unit.
Wait for 20 seconds, switch on the unit. Proceed.
2. Power to the balancer may have been interrupted. Proceed.
• Switch off the unit. • If this happens frequently, have your power system
checked. If it is OK, call ACCU Service. Wait for 20 seconds, switch on the unit.
Proceed.
• If this happens frequently, have your power system
Wheel does not spin automatically.
1. Lowering the switch guard does not activate a wheel checked. If it is OK, call the Service team.
spin.
• Check if the switch is mechanically activated by
lowering the guard.
2. Electrical malfunction.
Operator's Manual ACCU 1500