Storage Station With Water Reservoir; Device Functions - Cleanmaxx AS8128 Mode D'emploi

Storage Station with Water Reservoir

21
27
26
21 Clip for locking the iron in place
22 Rollers for making it easier to position
the iron
23 Valve for pumping the water out of the
external water reservoir into the iron

Device Functions

• The device features electronic temperature setting, which reliably sets and main-
tains the chosen temperature. You can use the
you want (see the "Temperature Setting" section).
• With the steam quantity control (2) you can select the quantity of steam to be
emitted during steam-ironing. On level
largest amount of steam is emitted. You can fi nd the suitable steam quantity level by
consulting the table in the "Temperature Setting" section.
• The device has an automatic switch-on function and an automatic safety switch-
off function. Both work with the device in both the horizontal and vertical position:
1. If the iron is not moved in the horizontal position (or lying on its side) for around
25 to 30 seconds and in the vertical position for around 8 to 10 minutes, the
supply of heat switches off and the device goes into stand-by (automatic safety
switch-off function). CAUTION: It takes a little while for the bottom of the iron
to cool down. Even once the device is in stand-by mode, never leave it
unattended while it is still connected to the mains power!
2. On the display the
regular intervals a beep reminds you that the iron is switched on and is not being
used.
3. When you move the iron, it switches back on again (automatic switch-on func-
tion).
22
25
24 Non-slip feet
25 MAX marking: maximum amount of
26 Release button for the clip
27 Flip-up water reservoir catch
no steam is produced; on level
bar fl ashes at the position AUTO AUS (auto off) and at
24
23
24
water that can be poured in
button (6) to select the temperature
24
the