Before Initial Use; Mounting / Removing Attachments; Filling The Water Reservoir - Cleanmaxx YF-418-12 Mode D'emploi

Masquer les pouces Voir aussi pour YF-418-12:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN

Before Initial Use

CAUTION!
Danger of suffocation from plastic fi lms and bags! Keep children and animals away
from the packaging material.
Water residues in the water reservoir are attributable to the fact that this device has
been tested and do not constitute a defect.
Unpack the items supplied and check them for completeness (see the "Items Sup-
plied and Device Overview" chapter) and possible transport damage. If the device,
the mains plug, the mains cable or the accessories do have damage, do not use the
device(!), but contact our customer service department.
Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.

Mounting / Removing Attachments

CAUTION!
Before removing / changing an attachment, always switch off the device and pull the
mains plug out of the plug socket. Never pull the mains cable, but always pull the
mains plug to do this.
Shortly after use, the attachment used may still be very hot. Wait until the device and
the attachment used have cooled down completely before removing them.

Filling the Water Reservoir

CAUTION!
Before fi lling / emptying the water reservoir, always switch off the device and pull the
mains plug out of the plug socket. Never pull the mains cable, but always pull the
mains plug to do this.
After use, the device may still be hot. Wait until the water reservoir has cooled com-
pletely before fi lling / emptying it.
Never pour any cleaning agent or other additives into the device. This may destroy
the device and safe working is no longer guaranteed.
Pour no more than 250 ml (note the max marking) of water into the water reservoir.
01535_DE-EN-FR-NL_A5_V3.indb 16
01535_DE-EN-FR-NL_A5_V3.indb 16
16
Attaching: Place the attachment with the locking lug at the
top on the steam bottom and press it down fi rmly. The at-
tachment must be heard to engage in place.
Removing: Pull the tab on the bottom of the attachment
forwards and remove the attachment.
21.08.2018 14:10:43
21.08.2018 14:10:43

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

01535

Table des Matières