Transport; Assembly; Preparatory Activities; Checking Delivery Content - HOLZMANN MASCHINEN ED400FD Manuel D'utilisation

Irrespective of all safety regulations, your common sense and appropriate technical
suitability/training are and will remain the most important safety factor for error-free operation of
the machine. Safe working primarily depends on you!
17

TRANSPORT

Damaged or insufficiently strong hoists and load slings can result in serious injury or
even death. Before use, therefore, check hoists and load slings for adequate load-
bearing capacity and perfect condition. Secure the loads carefully. Never stand under
suspended loads!
The lathe is heavy! At least two persons are required to carry the lathe!
Avoid using sling chains as there is a risk of damaging the lead screw. Ensure that
the lead screw is not touched by the lifting slings when lifting. Never lift the machine
by the lead screw!
To ensure proper transport, also observe the instructions and information on the transport
packaging regarding centre of gravity, attachment points, weight, means of transport to be used
and the prescribed transport position, etc.
Before lifting the machine, check that the tailstock is clamped. If necessary, change the position
of the bed carriage and/or tailstock to obtain a balanced load stop.
If you are transporting the lathe with a vehicle, ensure that the load is secured accordingly!
18

ASSEMBLY

18.1

Preparatory activities

18.1.1 Checking Delivery Content

Always note visible transport damage on the delivery note and check the machine immediately
after unpacking for transport damage or missing or damaged parts. Report any damage to the
machine or missing parts immediately to your retailer or freight forwarder.
HOLZMANN MASCHINEN GmbH
WARNING
CAUTION
NOTICE
www.holzmann-maschinen.at
Transport the machine in its packaging to the
installation site. To manoeuvre the machine in
the packaging, a pallet truck or a forklift truck
with the appropriate lifting force can be used.
TRANSPORT
46
ED400FD | ED400FDDIG