Description Of The Snmp Traps - Gorgy Timing LEDI NETWORK IN Mode D'emploi

► ntpOutBusCardactivation:
Indicate if the output of the card activated or deactivated (this feature can be
controlled from the WEB interface). If the card cannot be deactivated, this field
has the value notapplicable;
ntpOutBusCardTimezone:
►
Time-zone for this output. This is displayed as an offset from universal time. This
setting can be changed from the WEB interface;
► ntpOutBusCardDayLightSavingPolicy:
Indicate which day saving time policy is used. If there is no DST, this field has
the value <none>. This setting can be changed from the WEB interface;
► ntpOutBusCardDayLighSavingCurrent:
Indicate if Day Saving Time is in effect (value summertime) or not (value winterti-
me). If Day Saving Time is not activated, this field has the value notapplicable;
► ntpOutBusCardTotalOffset:
Indicate current total offset from UTC.
Here is an example of the description of the output cards displayed in a SNMP browser:

5.1.2. Description of the SNMP traps

# Related MIB variable
1 ntpCliAutoConfig
2 ntpCliAutoConfigDone
3 ntpCliAutoConfigFail
4 ntpCliLearning
6 ntpCliPollFail
7 ntpCliSrvElected
5 ntpCliTracking
MDE-LEDI-NETWORK-IN-4065V1.0
5.
Alarm meaning
Auto configuration of the NTP client (NTP
servers searching) : starting, done or fail
The NTP client begins is synchronization on
the remote server.
No or not enough reply from current NTP
server, trying another one
A new server is elected for synchronisation
The NTP client is operating normally
SNMP INTERfaCE
87