Front Display Interface; Start-Up Conditions - Gorgy Timing LEDI NETWORK IN Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The front display interface can display up to 16 characters. Two buttons provides
you with display configuration and global reset. The LEDI Network IN uses the front
display to show current time and different alarm condition.
Reset the LeDI
Network Enhanced

3.1. STaRT-UP CONDITIONS

During start-up, the time and date of the LEDI Network IN are not valid and are not dis-
played. Then, you can see the following texts:
When the device start, all the dots of the displays are lightened.
During hardware initialization, the following text is displayed.
If no server is configured by the user, the LEDI Network IN try to detect GT servers
and display the following message:
If the auto detection stage fails, the following text is displayed until a GT server is
available on the network:
64
3.

fRONT DISPLaY INTERfaCE

UTC and LOCaL
MDE-LEDI-NETWORK-IN-4065V1.0
Switch between
time display

Publicité

Chapitres

Table des Matières
loading

Table des Matières