Output Cards Configuration; Introduction; Default Configuration; Change The Settings - Gorgy Timing LEDI NETWORK IN Mode D'emploi

2.2. OUTPUT CaRDS CONfIGURaTION

2.2.1. Introduction

Your LEDI Network IN is provided with up to 4 output cards. Each output card is tightly
synchronized on the NTP time code received from the NTP server. Each card acts as
a kind of translator that receives time from the NTP software and output specific time
code.
Currently, there are 6 kinds of cards:
► ASCII+TOP RS232 ('A' type card)
► ASCII+TOP RS485 ('R' type card).
► AFNOR NFS 87500 / IRIGB ('B' type card).
► AFNOR /IRIGB TTL / RS422 ('T' type card).
► ALARM ('G' type card).
► NTP server ('N' type card).
You can freely use and copy the table Devices configuration in Appendix F – Additional
documents.

2.2.2. Default configuration

When you receive this product from Gorgy Timing, all the output cards are configured to
output UTC time and time is constant all along the year (no Day Saving Time correction).
The display is managed as an output cards and can be configured in the same way..

2.2.3. Change the settings

Open the WEB site of the LEDI Network IN (see part 5). Click on the
The current configuration of your product appears at the screen (shown below for a 9257/
A model):
62 MDE-LEDI-NETWORK-IN-4065V1.0
button.