Gorgy Timing LEDI NETWORK IN Mode D'emploi page 85

► ntpCliSyncSrvTable
A table that contains all the servers used for synchronization and information. First
entry in the table is server being used for synchronization. Second entry is the pre-
ferred second server, etc. Each entry has the following format:
ntpCliSyncSrvRank:
►
rank of the server. Server of rank 1 is used for synchronization.
► ntpCliSyncSrvAddress
IP address of the server.
► ntpCliSyncSrvAccuracy:
Accuracy of the server as returned in the NTP frame (something like 2^-x se-
conds).
► ntpCliSyncSrvUpAccuracy (Gorgy Timing server only)
Accuracy of the server as returned during auto-detection stage.
► ntpCliSyncSrvUpSrvLoad (Gorgy Timing server only)
Load of the server (average number of requests per second) as returned during
auto-detection stage.
► ntpCliSyncSrvPrefered (Gorgy Timing server only)
A number that indicates a user-defined rank attached to this server. When auto-de-
tection is activated, the LEDI Network IN takes the server with higher rank.
MDE-LEDI-NETWORK-IN-4065V1.0
:
5. SNMP INTERfaCE
85