Status Bar - Gorgy Timing LEDI NETWORK IN Mode D'emploi

► Firmware  Version/Release Date
Version of the software running in the LEDI Network IN and date of the last produ-
ced software (in English format yymmdd for example 021010 for 2002, October the
10th);
► Last reboot reason
A text that Indicates why the LEDI Network IN has restarted the last time.
WEB SITE aCCESS PROTECTION
If you want to protect access to the parameters of the LEDI Network IN, you can specify
a password. This is done by enter the password twice in the area Enter password and
Confirm password (the same password in the two areas).
If you don't want to protect the parameters, check the box Without password.
When a password is set, it will be asked to the user at the next connection. In this case, the
main screen looks like follows:

STaTUS BaR

The status bar is positioned on bottom of the WEB page. It gives information about the NTP
client software. It contains the following information:
Current UTC time
received from NTP
MDE-LEDI-NETWORK-IN-4065V1.0
Current state of
NTP software
4. WEB INTERfaCE
Current state of remote NTP
server synchronization
71