Description Of The Web Interface; Main Screen - Gorgy Timing LEDI Mode D'emploi

4.2. DESCRIPTION Of ThE WEB INTERfaCE

4.2.1. Main screen

This is the screen that appears when accessing the WEB site of the LEDI Network ITS/
DCLS/NTP Server. The first four buttons on the left of the screen provide an access to
the following panels:
► Standard: information about the product and configuration of network parameters.
See part 2.2.
► State : Current working state of the product
► SNMP: configuration of SNMP parameters.
NTP: diagnostic and configuration of the NTP software behavior.
►
► Input: offset from input time code, autonomy and autonomous running mode confi-
guration.
► Output: diagnostic and configuration of output cards and display.
► Download : Download a new software release
The Submit button updates immediately the LEDI Network ITS/DCLS/NTP Server
configuration. The configuration is stored permanently in an EEPROM.
WARNING. Some parameters cannot be modified without restarting
the device. If you change these kinds of parameters and click on
the button Submit, the device restarts with the new parameters
and needs some seconds before re-enable its output and generate
NTP code.
MDE-LEDInetworkITS-server-4078V1.3
4. WEB INTERfaCE
89