Description Of The Snmp Traps - Gorgy Timing LEDI NETWORK TOP Série Mode D'emploi

Here is an example of the description of the output cards displayed in a SNMP browser:

5.1.2. Description of the SnMP traps

# Related MIB variable
1 ntpCliAutoConfig
3 ntpCliAutoConfigDone
2 ntpCliAutoConfigFail
4 ntpCliLearning
6 ntpCliPollFail
7 ntpCliSrvElected
5 ntpCliTracking
MDE-LEDInetworkTOP-4092-V1.1
Auto configuration of the NTP client (NTP servers
searching) : starting, done or fail
he NTP client begins its synchronization
on the remote server.
No or not enough reply from current NTP server,
trying another one
A new server is elected for synchronisation
The NTP client is operating normally
Alarm meaning
71