Gorgy Timing LEDI NETWORK IN Mode D'emploi page 75

The left part of the NTP screen allows you to configure the synchronization mode and
the NTP servers used:
If you select the checkbox Auto-detection, the LEDI Network IN try to use the GT NTP
servers present on your network and use the more appropriate synchronization mode.
If you don't select the checkbox Auto-detection, you have to indicate the synchroniza-
tion mode and the NTP servers to use.
The following table can help you to select the more appropriate parameters:
# of NTP servers
Mode
One server
Two servers
Three servers
MDE-LEDI-NETWORK-IN-4065V1.0
used
1 Use only one server for synchronization
Use the first server at startup. If this server fails,
2 commute to the second server. If this server fails,
commute to the first one and so on...
Use the first server at startup. If this server fails,
3 commute to the second server. If this server fails,
commute to the third one and so on...
4. WEB INTERfaCE
Description
75