Description Of The Web Interface; Ecran Principal - Gorgy Timing LEDI NETWORK IN Mode D'emploi

4.2. DESCRIPTION Of THE WEB INTERfaCE

4.2.1. Ecran Principal

This is the screen that appears when accessing the WEB site of the LEDI Network
IN. The first four buttons at the left of the screen provide an access to the following
panels:
1. Standard: information about the product and configuration of network parameters
See part 2.2.
2. SNMP: configuration of SNMP parameters;
3. NTP: diagnostic and configuration of the NTP software behavior;
4. Output: diagnostic and configuration of output cards and display.
The Set Up! button updates immediately the LEDI Network IN configuration. The confi-
guration is stored permanently in an EEPROM.
WARNING. Some parameters cannot be modified without restarting
the LEDI Network IN. If you change these kind of parameters and
click on the Set Up! button, the LEDI Network IN restarts with the
new parameters and needs 2 minutes before re-enable its outputs.
68 MDE-LEDI-NETWORK-IN-4065V1.0