Description Of The Web Interface; Main Screen - Gorgy Timing LEDI NETWORK TOP Série Mode D'emploi

4.2. DESCRIPtIOn OF thE wEB IntERFaCE

4.2.1. Main screen

This is the screen that appears when accessing the WEB site of the LEDI NETWORK
TOP. The first four buttons at the left of the screen provide an access to the following
panels:
► 1. Standard: information about the product and configuration of network parame-
ters. See part 2.1.2.
► 2. SnMP: configuration of SNMP parameters.
► 3. ntP: diagnosis and configuration of the NTP software behavior.
► 4. Output: diagnosis and configuration of pulse output.
The Set Up! button updates immediately the LEDI NETWORK TOP configuration. The
configuration is stored permanently in an EEPROM.
Warning!
Some parameters cannot be modified without restarting the LEDI
NETWORK TOP. If you change these kind of parameters and click
on the Set Up! button, the LEDI NETWORK TOP restarts with the
new parameters and needs 2 minutes before re-enable its outputs.
56 MDE-LEDInetworkTOP-4092-V1.1