Product Contents; Mounting - DS Produkte ZJ1002 Mode D'emploi

Product contents

Not shown:
• Mounting material:
– 1 x locking screw (no. 47)
– 1 x screw (no. 18) with 1 x washer and 1 x nut (no. 22)
– 3 x bolts: 1 x short (no. 29), 1 x medium (no. 30), 1 x long (no. 31)
• 1 x Allen wrench (no. 32)
• 1 x spanner (no. 33)

Mounting

ATTENTION!
❐ Keep children and animals away from the packaging material. Danger of suffocation
exists!
❐ Mount the device in a suitable area with adequate space on all sides.
❐ If any of the adjustment devices are left projecting, they could interfere with the user's
movement.
❐ Before assembling the device, spread out a blanket or tarp to protect your fl oor.
• Unpack all parts and make sure that the product contents are complete (see chapter
"Product contents") and check for any damages from transport. If you identify dam-
ages to the components, do not use them (!), instead contact our customer service
centre.
• Assemble the device as described below.
1 See chapter "Exploded view and part list" for the numbering.
Back rest
with seat and
rear support
foot (already
mounted)
2 x handles
with loops for
rubber bands
2x rubber
bands
1
30
Front support
foot
Head rest