Protection From Damage By Electrostatic Charging; Scope Of Delivery; Warranty Conditions - Burkert 8626 Instructions De Service

Protection from damage by electrostatic charging

ATTENTION
EXERCISE CAUTION ON
HANDLING!
ELECTROSTATICALLY
SENSITIVE COMPONENTS/
MODULES

Scope of delivery

Immediately after receipt of the delivery, make sure the contents agree with the
stated scope of delivery. The latter comprises:
• MFC or MFM Type 8626, 8006 or 87xx
• Operating Instructions (possibly on data carrier)
• in the case of bus devices, supplements to the Operating Instructions
(possibly on data carrier)
• Report of final testing / calibration
The plug connectors matching the electrical interfaces of the MFC may be
obtained as accessories.
In case of irregularities, please contact at once our Customer Center:
Bürkert Fluid Control Systems
Customer Center
Chr.-Bürkert-Str. 13-17
D-76453 Ingelfingen
Tel. : (+49)7940-10111
Fax: (+49)7940-10448
E-mail: info@de.buerkert.com
or your Bürkert Distributor.

Warranty conditions

Bürkert grants a warranty on the proper functioning of the MFC or MFM for one
year, provided that the device is used as intended and that the specified conditions
fo use are complied with.
If the device does not function perfectly, it will be repaired or exchanged within the
warranty term free of charge.
ATTENTION!
6 - MFC/MFM
This device contains electronic components that are
sensitive to electrostatic discharge (ESD). Contact
to electrostatically charged persons or objects will
endanger these components. In the worst case,
they will be immediately destroyed or will fail after
commissioning.
Observe the requirements of EN 100 015 - 1 in
order to minimize the possibility of, or avoid, damage
from instantaneous electrostatic discharge. Also
take care not to touch components that are under
supply voltage.
The warranty extends only th the MFC or MFM and its
components, not however to consequential damage of any kind
caused by failure or malfunction of the device.