General Notes; Symbols; Safety Notes - Burkert 8626 Instructions De Service

GENERAL NOTES

Symbols

The following symbols are used in these operating instructions:
marks a work step that you must carry out.
ATTENTION!
marks notes on whose non-observance your health or the
functioning of the device will be endangered.
NOTE marks important additional information, tips and
recommendations.
Use according to the instruction
ATTENTION!
The use according to the instructions expecially includes the
media quality. Contaminated media and media containing
particles influences the accuracy. Liquid media entering the
sensor area, can affect the sensor and the function of the
MFC / MFM.
In this cases you have to install applicable maintenance units
like filters, liquid precipators etc..
The device only must be used with the parameters specified in the chapter
"Technical Data" and on the device label.
Read the chapter of the operating instructions very carefully an pay attention to
the requirements in the safety notes.
Follow the instructions in the single chapters and observe the safety notes. Not
following the instructions and the safety notes, causes a lapse of liability claim.

Safety notes

• Keep to standard engineering rules in planning the use of and operating the
device!
• Installation and maintenance is only allowed by specialist personnel using
suitable tools!
• Observe the current regulations on accident prevention and safety for
electrical devices during operation and maintenance of the device!
• Before interfering with the system, always switch off the voltage!
• Take suitable precautions to prevent unintended operation or damage by
unauthorized action!
• On non-observance of this note and unauthorized interference with the
device, we will refuse all liability and the guarantee on device and
accessories will become void!
MFC/MFM - 5