Technical Data - Burkert 8626 Instructions De Service

TECHNICAL DATA

Environmental tests
• Temperature cycles to EN 60068-2-14, Nb and EN 60068-2-33
• Head and humidity to EN 60068-2-38, Z/AD
• Shocks to EN 60068-2-27
• Vibration to EN 60068-2-6
• IP protection type to EN 60529
• Free fall to EN 60068-2-32
• UPS fall test to DIN ISO 2248 and DIN ISO 2206
Electromagnetic compatibility (EMC)
All devices are CE conforming for industrial use and have passed the associated
EMC tests to
EN 50081-2:03/94 „Basic engineering standard for interference emission;
Part 2: Industrial domain"
EN 50082-2:02/96 „Basic engineering standard for interference resistance;
Part 2: Industrial domain".
Communications interface
RS232: direct connection to PC via RS232 adapter, communication with special
software (MassFlowCommunicator – siehe Appendix C).
With 8711 / 8701, 8713 /8703 and 8710 / 8700, an external inferface
driver is necessary (integrated in adapter for these types - see
Appendix A).
RS485: connection via RS485 adapter (excerpt types 8713 / 8703)
BUS: Profibus DP or DeviceNet connection (bus devices only)
Seal material
FKM (other materials on request)
The compatibility of the seal material with the usual operating media can be taken
from the Bürkert stability tables.
ATTENTION!
The data given in this table are provided for information and
cannot replace own tests under the actual operating
conditions. In particular, no guarantee for medium compatibility
can be derived thereform.
MFC/MFM - 17