Scope of delivery
Immediately after receipt of the delivery, make sure the contents agree with the
stated scope of delivery. The latter comprises:
•
MFC or MFM Type 8626, 8006 or 87xx
•
Operating Instructions (possibly on data carrier)
•
in the case of bus devices, supplements to the Operating Instructions
(possibly on data carrier)
•
Report of final testing / calibration
The plug connectors matching the electrical interfaces of the MFC may be
obtained as accessories.
In case of irregularities, please contact at once our Customer Center:
Bürkert Fluid Control Systems
Customer Center
Chr.-Bürkert-Str. 13-17
D-76453 Ingelfingen
Tel. : 07940-10111
or your Bürkert Distributor.
Warranty conditions
Bürkert grants a warranty on the proper functioning of the MFC or MFM for one
year, provided that the device is used as intended and that the specified conditions
fo use are complied with.
ATTENTION!
If the device does not function perfectly, it will be repaired or exchanged within the
warranty term free of charge.
ATTENTION!
4 - MFC/MFM
Use as intended includes, in particular, adequate medium quality.
Media that are heavily contaminated or contain particulates are
detrimental to precision; if liquid phases enter the sensor
chamber, the function of the sensor and the MFC/MFM may be
impaired. In these cases, a suitable maintenance unit (filter, liquid
separator) must be installed upstream of the MFC/MFM.
The warranty extends only th the MFC or MFM and its
components, not however to consequential damage of any kind
caused by failure or malfunction of the device.