General Information; Scope Of Delivery - Burkert PTB 01 ATEX 2194 X Mode D'emploi

WARNING!
Dangerous situations may occur during installation and main-
tenance work.
• This work may only be carried out by specialist personnel using
appropriate tools!
• Ensure that the process is restarted in a defi ned and controlled
manner after an interruption in the electrical or pneumatic power
supply!
CAUTION!
The general rules of technology apply to the planning and ope-
ration of the device!
Failure to observe these rules may result in injury and / or damage
to the equipment or its surroundings.
• Observe the general rules of technology!
The device was developed in compliance with recognised
safety engineering regulations and represents the latest in
state-of-the-art technology. However, risk may nevertheless
arise.
Operate the device only when it is in proper working order and
only in accordance with the operating manual.
Failure to observe this information and unauthorised interven-
tion in the device releases us from all liability and invalidates
any warranty applicable to the devices and accessories!
01 ATEX 2194 X

4 GENERAL INFORMATION

4.1 Scope of delivery

Immediately upon receipt of delivery, check that the contents have
not been damaged and that the delivery matches the delivery note or
packing list in type and scope.
Please contact us immediately in the event of discrepancies:
Germany
Contact Address:
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfi ngen
Tel. : 07940 - 10 111
Fax: 07940 - 10 448
E-mail: info@de.buerkert.com
International
Contact addresses are found on the fi nal pages of this operating
manual.
You can also fi nd information on the Internet under:
www.buerkert.com Bürkert
- 11 -
Company Locations
english