Table Des Matières; Instructions For The Technician - BIANCHI VENDING Brasilia TALIA Manuel D'emploi Et D'entretien

Table des Matières

Les langues disponibles

INFORMATION TO THE USERS

Under Legislative Decree 25 September 2007, no.185 and art. 13, Legislative Decree 25 July 2005, no.151 "Implementation of Directives 2002/95/EC,

2002/96/EC and 2003/108/EC, regarding the reduction of use of hazardous substances in electrical and electronic equipment as well as waste disposal".

The barred waste container symbol on the equipment means that the product, at the end of its service life, must be disposed of separately from the

other types of waste.

The user must therefore convey the equipment, at the end of its service life, to the appropriate separate collection centres for electronic/electrotechnical

waste products or return it to the dealer when purchasing a new equivalent equipment.

The appropriate separate collection and the following sending of the used equipment to recycling, treatment and eco-friendly disposal will help avoid nega-

tive effects on the environment as well as on health along with an easier recycling of the materials forming the equipment.

Any unauthorized disposal of the product by the user will imply the enforcement of the administrative sanctions as set out in Legislative Decree no. 22/1997

(article 50 and following articles, Legislative Decree no. 22/1997).

BEFORE USING THE MACHINE, READ THIS MANUAL CAREFULLY FOR ITS CORRECT USE IN ACCORDANCE WITH THE CURRENT SAFETY STANDARDS.

ATTENTION: Important safety

indications

READ the instruction manual

machine carefully before using

the machine

IMPORTANT NOTICES

TECHNICIAN

The technician is the person responsible for the installation, the commissioning and programming of the machine. Calibration must be

performed only by the technician, who also holds the password for access to programming.

USER