B.9 Setting Parameters - AOIP THERMYS 150 Mode D'emploi

THERMYS 150 A O
DVANCED PERATION
Use the navigation keys to select a configuration. Edit the name of the configuration to be saved with the alphanumeric keys and confirm with ENTER.
To recall a configuration from memory, use the Menu File Open...
Use the navigation keys to select a configuration. Confirm with ENTER.
To erase the configurations of the THERMYS 150, refer to paragraph A.5.2 to enter the Maintenance mode. Use the Init EEP function key to reset the
configurations of the unit to zero.
B.9 Setting parameters
The parameters of the THERMYS 150 can be set using the Configuration Setup menus.
The Contrast... sub menu is used to adjust the contrast of the display.
The Date/Time... sub menu is used to set the date and time of the unit.
The Preferences... sub menu is used to set the generic parameters which apply to all the functions performed by the THERMYS 150.
98/107