A.8 Simulation On Channel V2; A.8.1 Generation/Simulation Mode - AOIP THERMYS 150 Mode D'emploi

THERMYS 150 G
ENERAL
A.8 Simulation on Channel V2
Channel V2 may be used as a Generation/Simulation or Measurement Channel. This channel is accessed with the F2 function key (V2). Pressing this button
activates the transmission/simulation window: the lower window in the display is then marked by a rectangular border.
Key F2 is used to
switch from channel
V1 to channel V2.
A.8.1 Generation/Simulation Mode
Generation/Simulation mode from channel V2 is accessed via the F1 function key (Menu). When in measurement mode:
• Select V2 Configuration (near the bottom of the drop-down list) and Transmit with the function and navigation keys.
• Confirm with ENTER.
To select a simulation function, press the F1 key (Menu).
In Transmit mode, connections are across the four "IN/OUT" terminals located on the right half of the unit:
74/107