Technical Specifications; C.1 Measurement Function (Channel 1 And Channel 2); Dc Voltage (Cal Tc 75Mv); Resistance (Cal Pt100/Pt1000) - AOIP THERMYS 150 Mode D'emploi

THERMYS 150 T
ECHNICAL
C. T S
ECHNICAL PECIFICATIONS
The accuracies quoted apply at + 18°C to + 28°C unless otherwise stated, and are expressed as ± (n % L + C) where L = The reading and C = a Constant
expressed in practical units. The specifications are given for a confidence level of 95%.
They apply to a product placed under reference conditions of measurement defined hereafter:
- Power up unit and warm up for 30 minutes.
- Using instrument not connected to mains (230V or 110V).
- Wait for thirty minutes after disconnecting AC/DC power adaptor.
- For weak signals (temperature measurement by thermocouple probes) use connections with spade terminals or bare wires.
- Acquisition in filtered mode (averaged)
The accuracy includes the accuracy of the reference standards, non linearity, hysteresis, repeatability and long term stability over the period quoted.
C.1 Measurement Function (Channel 1 and channel 2)
C.1.1

DC voltage (Cal TC 75mV)

Range
+75mV
Temperature coefficient <5 ppm/°C from 0°C to 18°C and from 28°C to 50 °C.
Use the absolute value of the value measured (|L|) to calculate the accuracy.
C.1.2

Resistance (Cal PT100/PT1000)

Range Specified
measurement
range
400 Ω 0 Ω à 400 Ω
3600 Ω 0 Ω à 3600 Ω
Temperature coefficient < 5 ppm/°C from 0°C to 18°C and from 28°C to 50 °C.
• Automatic detection of connection scheme: 2 wire, 3 wire or 4 wire.
• For 2 wire connection, the measurement includes the resistance of the line.
• For 3 wire connection, add the out-of-balance of the line resistances.
C.1.3

Temperature by thermocouples

Sensor types:
- in accordance with CEI 584-1/1995 (couples K, T, J, E, S, B, N),
- in accordance with Din 43710 (couples U and L),
- in accordance with the ENGELHARD table (platinum couple).
- As per standard ASTM E 1751-00 (G couple)
- As per standard ASTM E 988-96 (D W3Re/W25Re couple; C W5Re/W26Re couple )
102/107
S
PECIFICATIONS
Specified Resolution
measurement
range
- 10mV + 75mV 1 µV
Resolution Accuracy/1 year
1 mΩ 0,006% L + 8 mΩ
10 mΩ 0,006% L + 50 mΩ
Accuracy/1 year Notes
0,005% + 2 µV Rin > 10 MΩ
Notes
4-wire measurement
4-wire measurement