B.7 Storing The Current Acquisitions - AOIP THERMYS 150 Mode D'emploi

THERMYS 150 A
DVANCED
• To display the reports, select the procedure: MENU/CALIBRATION PROC./BROWSE then ENTER.
• Select the procedure and press function key F2 (Reports).
• Select the report to be displayed from the list, then press function key F1 (Display) to confirm.
B.7 Storing the current acquisitions
The THERMYS 150 is capable of storing 10,000 values in one or more acquisition bursts.
• If necessary, use the F2 button to open the 'IN' window and display the Measurement menu bar.
• Press F1 key to open Menu
• Select the Menu function then Memory.
• Press ENTER.
Two new functions, Memory and MREC1, then appear in the bottom bar (replacing the functions Rest stat. And Hold). The left
be used to switch from one mode to the other.
Pressing the function button, F4 (MREC1), stores the current acquisition.
94/107
O
PERATION
and right arrow buttons can