A.2.4 Side Connectors; A.2.5 Screen - AOIP THERMYS 150 Mode D'emploi

The 8 terminals of the THERMYS 150 are of the "push & lock" type. They accept 4 mm banana plugs, bare wires, spade terminals and miniature connectors for
thermocouples.
A.2.4 Side connectors
There are two connectors on the left hand side of the unit.
• The first is a mains unit connector for battery charging.
• The second is a type B USB socket for connection to a computer.
USB Socket
Connectors dedicated to sensors (pressure and HART®) are located on the righ-hand side of the unit.
Isotech oven socket
(and pressure sensor
socket, inoperative in the
THERMYS 150)
A.2.5 Screen
The THERMYS 150 is fitted with an LCD graphical display which is backlit with white LEDs. The resolution of the display is 240 x 320 pixels.
When the unit is in use, the screen comprises:
• one window for displaying and programming the settings of the measurement function (IN/C1) (refer to paragraph B.2,
• a second window for displaying and programming the settings of the measurement function (IN/C2) (refer to paragraph B.2,
• A strip showing the various menus accessible by touch keys directly on the screen.
Material
Charger Socket
(only for the THERMYS 150).
Hart sensor socket
(inoperative in the
THERMYS 150)
A
61/107