B.4 Filtrage; B.5 Calibrated Sensors - AOIP THERMYS 150 Mode D'emploi

THERMYS 150 A
DVANCED
B.4 Filtrage
The Filtering function averages (filters) the measurements over predefined periods (1 s, 2 s and 5 s) in order to avoid excessively wide fluctuations (noise) of
the measured signal.
This function is accessible from the
B.5 Calibrated sensors
The unit's calibrated sensors function makes it possible to use sensors of which the calibration (correction) factors can be taken into account by the unit at the
time of measurement.
• Open the MEASUREMENT MENU dialog box,
• select the Calibrated Sensors function.
• press ENTER.
86/107
O
PERATION
SETUP/PREFERENCE menu.** Icon indicating that
the FILTERING
function is confirmed