AOIP THERMYS 150 Mode D'emploi page 90

THERMYS 150 A
DVANCED
Press ENTER to confirm the options in this screen, then select the probe type for channel C2 then channel C1.
You have the option of applying scaling to the device:
• Select ON and configure the settings.
• Press key F2 (Points) to set calibration points.
• Use the following buttons to define the points.
to edit an existing calibration point,
to add a calibration point,
to delete a calibration point.
To define the calibration sequence:
• Use the following keys to define the points:
pour éditer un point déjà édité
90/107
O
PERATION