Télécharger Imprimer la page

FUXTEC FX-SF210 Mode D'emploi page 139

Masquer les pouces Voir aussi pour FX-SF210:

Publicité

NOTE: Check the oil level before each use and every five working hours to ensure the oil level is
correct. Read "Checking the oil level" in the "Operation" section.
Empty the petrol in the tank by running the engine until it is empty.
Place a suitable oil canister under the oil drain plug.
Open the oil drain plug.
Tilt the engine to empty the oil into the canister. Used oil must be disposed of at the prescribed
location.
Replace the oil drain plug and fasten it securely.
Top up with the recommended oil and check the oil level as described in the "Operation"
section.
Replace the oil cap/dipstick securely.
Oil drain plug
CAUTION: Wash your hands thoroughly with soap and water as soon as possible after
handling used oil.
NOTE: Please dispose of used oil in an environmentally friendly manner. Take it to a recycling centre
or to the appropriate collection points.
Oil recommendations
When topping up oil, refer to the viscosity diagram below. See Fig. 23. The oil capacity of the engine
is 0.5 litres. Do not overfill. Use a 4-stroke or similar premium oil with detergent additives that fulfils
the requirements of the automotive industry.
Manual_FX-SF210_Int24_rev14
Picture 23
139

Publicité

loading