Publicité
The appliance
becomes clogged
with snow.
Manual_FX-SF210_Int24_rev14
-
The discharge chute is
blocked.
-
Shear pins are sheared
off.
-
Foreign object is stuck in
the milling auger.
-
Milling auger control
cable not set correctly.
-
Milling auger belt is loose
or damaged.
134
-
Switch off the engine and
remove the spark plug
cable. Clean the inside and
outside of the shaft with
the cleaning tool.
-
Replace shear pin(s).
-
Stop the engine
immediately and
disconnect the spark plug
cable. Remove the object
from the auger.
-
Set the milling auger
control cable.
-
Replace the milling auger
belt.
Publicité
