Publicité
•
Install the support rod of the snow chute
and secure the nut with
a spanner.
•
Now fit the upper part of the adjustment rod
of the ejection chute. To do this, push it
it through the rubber ring.
•
Slide the upper part of the adjustment rod into the holder of the counterpart and align the
holes.
•
Now insert the safety splint as shown.
CAUTION: It is not recommended to use the snow blower on gravel, as it can pick up and eject
loose gravel. This can lead to injuries or damage to the snow blower and surrounding objects.
⚫
For thorough snow clearing on smooth surfaces, move the skids on the housing to a higher
position.
⚫
Use the middle or low position if the area to be cleared is uneven, such as a gravel driveway.
Adjusting the skids:
Manual_FX-SF210_Int24_rev14
125
Publicité
