Publicité
•
Never make unauthorised modifications to safety parts. Check their function regularly in
accordance with the "Maintenance and cleaning" section.
•
Before cleaning, repairing or checking the machine, release all control levers and switch off the
motor. Wait until the milling auger has come to a complete standstill. Disconnect the ignition
cable and earth it to the engine to prevent unintentional starting.
•
Check bolts and screws at regular intervals for correct tightness in order to be able to work
safely with the machine. Also check the machine visually for damage.
•
Do not change the controller setting or overspeed the motor. The controller controls the
maximum permitted speed of the motor.
•
The guide rails and scuff plates of the snow blower are wearing parts and will wear out. For your
own safety, check all components regularly and only replace them with original spare parts
(OEM). The use of parts that do not fulfil the manufacturer's specifications can lead to reduced
performance and a lack of safety.
•
Check the control lever regularly for correct engagement and disengagement and adjust if
necessary. The explanation can be found in the "Settings" section of these operating
instructions.
•
Maintain the safety and information signs and replace them if necessary.
•
Follow the laws and regulations for handling petrol, oil, etc. to protect the environment from
pollution.
•
Before storage, let the machine run for a few minutes and remove any ice from the machine.
This prevents the milling auger from freezing.
•
Never store the machine or the petrol can in a room with an open flame, sparks or pilot lights
such as water heaters, ovens, dryers, etc.
•
Follow the instructions in the operating instructions for storage outside the operating period.
•
Check the fuel line, tank, tank cap and seals regularly for breakage or leaks. Replace if necessary.
•
Never start the engine with the spark plug removed.
•
Please check the machine annually to ensure that all mechanical and safety-related functions
are working correctly and are not worn. Failure to do so can lead to accidents, injuries or even
death.
Do not modify the engine
To avoid serious injury or death, the motor must not be modified in any way. Tampering with the
manufacturer's settings can cause the engine to overspeed, which can result in the engine reaching
a critical speed. Never tamper with the manufacturer's settings of the engine speed sensor.
Read the manual carefully. Fully familiarise yourself with the controls and the correct use of the
machine. Understand how to stop and switch off the machine. Understand how to stop and switch
off the machine. Understand how to quickly release a clamped attachment.
Do not allow anyone to use the machine without proper instruction. Ensure that the user wears
foot, leg, eye, face and ear protection. Keep the area clear of bystanders, children and pets. Never
allow children to operate or play with the machine.
Do not allow anyone to enter the DANGER ZONE. The DANGER ZONE is an area with a 15 metre
radius (approximately 16 paces) or 50 feet. Insist that people in the DANGER ZONE wear eye
Manual_FX-SF210_Int24_rev14
120
Publicité
