Publicité
Start pumping out
Confirm end of the disposal process with OK.
Start the pumping process at the disposal vehicle again.
Wait until the tank has been pumped empty (slurping
noises).
Stop pumping out
End the pumping process at the disposal vehicle.
Disconnect the suction hose of the disposal vehicle from
the Storz-B coupling.
Refilling the tank
Confirm end of the program with OK.
The "Fill valve" program adds cold water automatically,
until the static level is reached
Confirm end of the disposal process with OK.
Record the disposal in the log book.
Disposal procedure is completed.
6.6
EasyClean free Mix & Pump version
72 / 132
Installation and operating instructions
016-673
Publicité
