Publicité
6
Disposal
6.1
Follow the safety instructions!
WARNING
Follow the safety instructions in the instructions enclosed with the system and the control unit.
6.2
EasyClean free Standard version
Carrying out the disposal
Loosen the quick-release closure on the service access
cover, set aside the cover.
Now place the suction hose of the disposal vehicle in the
tank.
Start the pumping process at the disposal vehicle.
Wait until 1/3 of the calm water level has been pumped
away. Duration depends on the nominal size.
Cleaning the inside wall of the tank
At the same time as the pumping out process, clean the
inside walls of the tank with a water hose.
Once the tank has been pumped empty (slurping
noises) , end the pumping off process by the disposal
vehicle.
Wait briefly, then remove the suction hose.
66 / 132
Installation and operating instructions
016-673
Publicité
