Publicité
Connecting the riser pipe/disposal pipe
Undo the pipe clamps at the end of the direct disposal
pipe.
Connect the riser pipe (HDPE) provided by the customer
to the direct disposal pipe.
Flow direction of the inlet and outlet
Observe the flow direction of the inlet and outlet on the
drainage system on site.
4.4
Installing the control unit
EasyClean free Standard and Easyclean free Direct
The use of a control unit is not required.
WARNUNG
Disconnect the system from the power supply! Make sure that cables and electrical components are disconnected
from the power supply during work.
EasyClean free Mix and EasyClean Mix & Pump
See the installation and operating instructions 016-271
Connect 400 V Mono control unit for grease separators.
016-673
Installation and operating instructions
57 / 132
Publicité
