Publicité
► If a Sensor SonicControl is connected and you want to
With filled tank
calibrate it, then select
No calibration
wise select
► Press OK.
|Product type|
Menu
Product type
► Use the cursor keys to select the product type and con-
firm with OK.
► Press OK.
|Nominal size|
Menu
Nominal size
► Select the appropriate nominal size and confirm with OK.
► Press OK.
The selection affects which program runtimes are stored in the disposal.
|Number of pumps|
Menu
Number of pumps
|1 pump|
|2 pumps|
► Select
or
► Press OK.
The initialisation is completed.
switch the control unit on.
Connect the power supply.
Set the main switch to the „ON" position.
Control unit starts automatically.
The control unit is initialised during the initial start-up.
5.3
Disposal times
EasyClean free Standard and EasyClean free Direct
Not required.
EasyClean free Mix
See the installation and operating instructions 016-271 Connect 400 V Mono control unit for grease separators
EasyClean free Auto Mix
A
Function
1
2
3
EasyClean free Mix and Pump
See the installation and operating instructions 016-271 Connect 400 V Mono control unit for grease separators
64 / 132
, other-
and confirm with OK.
appears.
appears.
menu appears.
accordingly in the menu with the respective nominal current and confirm with OK.
B Run time
in seconds
NS15 / NS 20
Clean
975
Part-fill
675
Fill
3987
Installation and operating instructions
Pump
Hot water valve
on
closed
on
open
off
closed
Cold water valve
closed
closed
open
016-673
Publicité
