Button Sound - Alde Compact 3010 Instructions D'utilisation

8. Button sound

With this function, you can activate or
deactivate the button sound.
The button sound is activated in the factory
setting.
9. Screen Brightness
Brightness: The brightness of the display
(working mode) can be adjusted from 1 to
10. Factory setting is 5.
Standby brightness:
Off: Used to turn the display's backlight-
ing off so that the display is turned off
(becomes dark) in standby mode (the LED
is still active).
On: Used to activate the backlighting in the
display (low lighting) in standby mode (the
LED is still active). Factory setting is On.
10. Language
Lan
This function is used to reset the screen
between different languages. Available lan-
guages are: English, French Canadian. On
the other hand, the service menu is only in
English (see section 10.1).
14
11. Tools / Key
Under Tools / Key you can lock or unlock
access to the tool menu.
12. Celsius / Fahrenheit
C/F
Change temperature from Celsius to
Fahrenheit.
13. *Load monitor
Amp
This function is used to prevent the 120 V
breaker being overloaded. If the total
power consumption of the vehicle exceeds
the set value, the boiler's power will be
automatically reduced. On account of volt-
age variations and tolerances, different set-
ting levels can be selected (for example,
for 20 A breaker, one can choose 18, 20
or 22 Amp setting). If the breaker does not
hold, choose a lower set value. The func-
tion is deactivated in the factory setting.
NOTICE
The load monitor has to be installed
for the function to be used (see the
manual for the vehicle).