Publicité
3. BEFORE STARTING
3.1. INFORMATION TO START
When you first turn on the oven, you might notice some smoke. Don't worry, just wait for the smoke
to clear before using the oven.
How door works
During the pyrolytic cleaning process, the oven door remains locked at all times. If it's not locked, the
oven will display error code 24 and pause the cleaning function.
How illumination works
The oven cavity is illuminated by one or more light bulbs, typically activated each time a cooking
function begins.
For ovens equipped with a door switch (see below), the light automatically turns on when the door
is opened.
For ovens equipped with lamp button, it can also be used to activate the lighting.
If the oven door remains open for more than 10 minutes, the lights will automatically turn off.
During pyrolytic cleaning process light remains off. *
How cooling fan works
The cooling fan is responsible for dissipating the heat, keeping the oven and its surroundings from
getting too hot, as well as protecting kitchen appliances from the effects of high temperatures. For
this reason, the cooling fan remains audible for a period of time even after the oven is turned off.
It operates during and after cooking cycle in relation to the internal temperature of the oven.
When the cooling fan is operational, it usually generates a gentle humming or whirring noise. You may
also notice a warm airflow emanating from the gap between the oven door and the control panel.
During pyrolytic cleaning and when door is locked, cooling fan is switched on. *
During ECO function the light will remain off.
(*only for pyro ovens)
How status bar works
The status bar, based on the set programs, simplifies monitoring of temperature and time. Specif-
ically, for functions involving preheating, it displays the temperature increase during this phase. In
cooking programs and the pyrolytic cleaning function, it shows the countdown of cooking time and
the cleaning cycle, respectively.
3.2. FIRST USAGE
When the appliance is switched on for the first time, the initial step is to select the language, set time
of day, choose between 13 ampere or 16 ampere.
First, a welcome message will appear on the display. To continue, press
EN 23
Publicité
