Publicité
8. It is important for safety that all team members are always
fully aware of each other's intentions in order to avoid
dangerous misunderstandings.
9. The high pressure system must not be started up and run
under pressure without all team members in position and
without the Operator having already directed his/her lance
toward the work area.
3.5
Safety during system maintenance
1. High pressure system maintenance must be carried out
in the time intervals set by the manufacturer who is
responsible for the whole group according to law.
2. Maintenance should always be performed by trained and
authorized personnel.
3. Assembly and disassembly of the pump and the various
components must only be carried out by authorized
personnel, using appropriate equipment in order
to prevent damage to components, in particular to
connections.
4. Always only use original spare parts to ensure total
reliability and safety.
4
PUMP IDENTIFICATION
Each pump has its own Serial No. XX.XXX.XXX see pos. and
an identification label, see pos. of Fig. 1 which shows:
-
Pump model and version
-
Serial number
-
Max revs.
-
Absorbed power HP - kW.
-
Flow rate l/min - Gpm.
-
Pressure bar - P.S.I.
2
Modello
2
Matricola
Model, version and serial number must always be
indicated when ordering spare parts
20
1
XX.XXX.XXX
R.P.M.
kW/Cv
l.min/GPM
bar/PSI
a brand of
INTERPUMP GROUP S.P.A.
MADE IN ITALY
Fig. 1
Publicité
