Publicité
The fifth wheel with standard plate must be kept clean, oiled and spread
with grease
chap. 2.2 COMMISSIONING page 12/35.
Prevent the accumulation of foreign bodies on its surface and also in the
closure
Keep it clean at the end of each journey; clean thoroughly as required.
Cleaning must also be performed before use after a long period of non-
use;
Perform cleaning using a jet of air
Towards the coupling area after having activated the opening lever
in opening and closing mode;
N
The use of high pressure cleaning devices is allowed limitedly in the
O
coupling point area.
T
E
FIFTH WHEEL
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
in the part in contact with the semi-trailer counter-plate, see
mechanism.
RP90
8
CLEANING
aimed towards the opening lever.
PAGE
32/35
CHAP . 8
REV. 00
(19c)
19c
Publicité
