Publicité
On reading this chapter, each reference is to be identified in the
figures from page 13/35 to page 18/35.
Before performing the operations, read the following instructions
carefully:
Wear protective gloves.
The following coupling and uncoupling instructions are important;
The operator must always check that these methods are respected
all times and in all situations.
Attention! Possibility of crushing the limbs.
3.1
COUPLING
1)
Make sure that the lock jaw (7) is visible as in the position shown in the figure,
otherwise remove the carabiner hook (19m), rotate the safety lever (19a)
upwards and take the opening lever (19c) towards the front part of the vehicle
and pull it until it trips, which determines the blocking of the lever itself. The
wedge blocking lever (20) rises, as shown in the figure.
19m
FIFTH WHEEL
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
3 USE
19c
19a
RP90
19a
2
20
PAGE
13/35
CHAP . 3
REV. 00
at
1
4
3
7
11b
Publicité
