Publicité
General
We appreciate your choice of a new device from R82 - a worldwide supplier of technical aids and applianc-
es for children and teenagers with special needs. To fully benefit from the options offered by this device
please read this user manual before use and save it for future reference.
Intended purpose
The device is a modular seating system for
children and adults with disabilities.
Indications
The device can be used by children and adults
with disabilities who lack the ability to maintain a
seated position. The target group for the device
is based on functional ability and not a specific
health condition or age.
The user is the person sitting in the device. The
caregiver is the person operating the device.
Never leave the user unattended in this device.
Ensure permanent supervision by a caregiver.
The use of the device will be discontinued multiple
times during the day when the user will be lying
down, standing or sitting in another assistive
device or a conventional device.
Contraindications
There are no known contraindications.
Precautions
Special attention should be given to the
considerations about the configuration of the
device and the use of accessories for users with
limitations in their:
• sensory functions and the sensation of pain.
Consider extra checks of the pressure caused
by the support provided by the device and its
accessories.
• movement function (e.g. experience
involuntary movements). Consider using a
device with a dynamic backrest.
• ability to maintain a seated position. Consider
using the device with accessories (e.g. side
supports, vests, belts or arm supports and a
tray).
• ability to maintain the position of their head.
Consider using accessories that provide
support to the positioning of the head.
Application areas
The device is for indoor and outdoor use.
Enclosed tools:
• 5 mm Allen key
Declaration of Conformity
This device conforms to the requirements of
the Medical Devices Regulation (2017/745).
Further, this device conforms to the requirements
according to:
• EN 12182
• EN 12183
The CE mark must be removed when:
etac.com
ENGLISH
• Rebuilding the device
• Using the device outside the intended purpose
and declaration of conformity
• Using other than original R82 spare parts and
fittings.
When combining the device with other devices,
the combination must not change the intended
purpose of the devices or modify the devices in
such a way that compliance with the applicable
requirements may be affected. The person /
company responsible for the combination of
the devices must ensure that the applicable
requirements are fulfilled.
Applicable requirements examples:
• Material safety (biocompatibility, flammability),
mechanical safety (stability, squeezing
hazards, inter connection), electrical safety.
Disposal
When a device reaches the end of its lifetime, it
should be separated by material type so that the
parts can be recycled or disposed of properly.
If required, please contact your local dealer for
a precise description of each material. Please
contact your local authorities to be informed
of the options available for recycling in an
environmentally friendly way.
Accessories and spare parts
The devices from R82 can be supplied with a
variety of accessories which comply with the
needs of the individual user. Spare parts can be
ordered on request. Find the specific accessories
on our website or contact your local dealer for
further information.
R82 Warranty
www.etac.com/support
Presales information and
instructions
Presales information and instructions are
available at www.etac.com, under your device, in
the documents section.
77
Publicité
