Scheppach C-PHTS410-X Mode D'emploi page 24

Table of contents
1 Introduction ........................................................
2 Product description (Fig. 1-19)...........................
3 Scope of delivery (Fig. 1) ...................................
4 Proper use..........................................................
5 Safety instructions..............................................
6 Technical data....................................................
7 Unpacking ..........................................................
8 Assembly............................................................
9 Before commissioning........................................
10 Operation ...........................................................
11 Working instructions...........................................
12 Cleaning .............................................................
13 Maintenance.......................................................
14 Storage and transport ........................................
15 Repair & ordering spare parts ............................
16 Disposal and recycling .......................................
17 Troubleshooting .................................................
18 Warranty conditions - Scheppach 20V IXES se-
ries .....................................................................
19 EU Declaration of Conformity.............................
20 Exploded view .................................................... 388
Explanation of the symbols on the
product
Symbols are used in this manual to draw your attention to
potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warn-
ings themselves will not rectify a hazard and cannot re-
place proper accident prevention measures.
Before commissioning, read and observe
the operating manual and safety instruc-
tions!
Attention! Failure to observe the safety signs
and warning information affixed to the prod-
uct and failure to observe the safety and op-
erating manual can result in serious injury or
even death.
Wear safety goggles.
Wear hearing protection.
Always wear a safety helmet!
Wear safety gloves!
24 | GB
24
25
25
25
26
29
30
30
31
32
33
35
35
37
37
38
39
39
41
91
1 Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
www.scheppach.com
Wear sturdy footwear!
Wear protective clothing!
Do not expose the product to rain. The prod-
uct may only be stationed, stored and oper-
ated in dry ambient conditions.
Only carry out maintenance, modification, ad-
justment and cleaning work when the motor is
switched off and the battery is removed.
Keep your hands away from rotating tools.
Keep your distance from other people and
electrical lines.
Open
Locked
Installation direction of the saw chain
Be very careful when handling lubricants!
Cutter bar length
Cutting length
Guaranteed sound power level of the product.
Lithium-ion battery
The product complies with the applicable
European directives.