Angelo Po 1N1FAEV Manuel D'utilisation page 43

GENERAL INFORMATION
IDENTIFICATION OF MANUFACTURER AND APPLIANCE
The nameplate shown here is fi tted directly to
the appliance. It contains references and all es-
sential information for safe operation.
One (fi g.1) contains references and all essential
information for operating safety, and the other
(fi g.2) provides gas information for each coun-
try of use.
Appliance model
A)
Type of customisation
B)
Manufacturer's nameplate
C)
Type of fume exhaust vent
D)
Serial number
E)
Protection rating
F)
CE marking of conformity
G)
Reference standard
H)
For all requirements contact the agents or
the headquarters of Angelo Po which can be
found in the contacts section of the website
http://www.angelopo.com.
3320060_ut_GB_rev.4
PROCEDURE FOR REQUESTING SERVICE
CE marking
L)
Product family type
M)
Gas pressure
N)
Appliance category
P)
Gas consumption
Q)
Rated power (kW)
R)
Gas type
S)
Code of country of destination
U)
Date of construction
V)
Voltage (V)
W)
Frequency (Hz)
X)
Rated power (kW)
Y)
Injector diameter
Z)
When requesting service, state the data pro-
vide on the nameplate and provide a descrip-
tion of the fault.
ENGLISH
15