Angelo Po 1N1FAEV Manuel D'utilisation page 36

ENGLISH
Hazard
Risk of electric
shock caused by
live components
Risk of electric
shock caused by
live parts
HAZARDS AND SAFETY PROVISIONS DURING USE
When using the appliance, watch out for the following hazards and provide for the countermea-
sures indicated below:
► Source of hazard: heat
Hazard
Flammable mate-
rial placed on the
evacuation area
Contact with hot
working surfaces
Scalding caused
by hot liquids
8
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and on
the adjacent metal acces-
sories
Where or in which situations
does the hazard occur?
In case of blocked fl ue
Accidental contact
Handling pans
Countermeasures
• Disable the power supply
before removing the protec-
tions
• Prevent the appliance from
being powered accidentally.
• Ensure that there is no volt-
age
• Before commissioning the
appliance, check that all
electric connections are not
damaged
• Use a power supply cable
with the specifi cations indi-
cated in section "Electrical
connection" of the installa-
tion manual.
• Before appliance commis-
sioning, check that electri-
cal connections are securely
fi xed
• Before commissioning,
make sure that the appliance
and its metal accessories are
connected to a system for
equipotential bonding
Countermeasures
• Training of personnel
• Training of personnel
and warning plate in
place on the appliance
and in the user manual
• Training of personnel
SAFETY
Safety device
• Protection
panels
• System
switch-dis-
connector
Equipotential
bonding sys-
tem
Safety device
None
None
PPE as required
by the applica-
ble laws in the
country of use.
3320060_ut_GB_rev.4