Angelo Po 1N1FAEV Manuel D'utilisation page 40

ENGLISH
HAZARDS AND SAFETY PROVISIONS DURING APPLIANCE DECOMMISSIONING
When decommissioning the appliance, watch out for the following hazards and provide for
the countermeasures indicated below:
► Source of hazard: Electric power
Hazard
Risk of electric
shock caused by
live components
► Source of hazard: Handling of heavy loads
Hazard
Risk of injury due
to body overload
► Source of hazard: Risk generated by materials/substances
Hazard
Concentration of
unburned gas emis-
sions due to an incor-
rect appliance de-
commissioning
12
Where or in which situations
does the hazard occur?
• On the power cable
• Under protective panels
• Under the control panel
• Under protection covers
Where or in which situations
does the hazard occur?
When the appliance
moves
Where or in which situations
does the hazard occur?
During appliance decom-
missioning
Countermeasures
• Operations to the electric
system may be carried out
by authorised and quali-
fi ed staff only, in accor-
dance with the relevant
applicable laws.
• Specialist procedure
• Turn off the power supply
before removing the cov-
ers
• Secure it to prevent acci-
dental switching on
• Ensure that there is no
voltage
Countermeasures
• Use a suitable lifting
device
• Observe the limit values
for lifting and transport
• Wear personal protec-
tive equipment
Countermeasures
Decommissioning opera-
tions must be carried out
by qualifi ed personnel
SAFETY
Safety device
• Protection
panels
• System
switch-dis-
connector
Safety device
• Protective
gloves
• Protective shoes
• Safety helmet (e.g.
for suspended
loads, overhead
operations...)
Safety device
None
3320060_ut_GB_rev.4