Angelo Po 1N1FAEV Manuel D'utilisation page 169

ADJUSTMENTS
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
)
Pull off the knob (A).
)
Undo the screws (C) and remove the control
)
panel (B).
Undo the screw (D).
)
Set the burner mount (E) at a distance of 17
)
mm , and tighten the screw (D).
Replace the control panel (B) and the knob
)
(A) on completion of the operation.
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
)
Pull off the knob (A).
)
Undo the screws (C) and remove the control
)
panel (B).
Undo the screw (D).
)
Set the burner mount (E) at a distance of 20
)
mm, and tighten the screw (D).
Replace the control panel (B) and the knob
)
(A) on completion of the operation.
ADJUSTING TOP BURNER PRIMARY AIR 10 KW
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
)
Pull off the knob (A).
)
Undo the screws (C) and remove the control
)
panel (B).
Undo the screw (D).
)
Set the burner mount (E) at a distance of 20
)
mm, and tighten the screw (D).
Replace the control panel (B) and the knob
)
(A) on completion of the operation.
3320060_inst_GB_rev.4
ADJUSTING TOP BURNER PRIMARY AIR 4 KW
ADJUSTING TOP BURNER PRIMARY AIR 7 KW
C
A
C
B
C
A
C
B
C
A
C
B
ENGLISH
D
D
D
15