Angelo Po 1N1FAEV Manuel D'utilisation page 171

REPLACING PARTS
INSTRUCTIONS AND WARNINGS FOR REPLACING PARTS
NOTE: Read the following section of
the "user instruction manual" carefully be-
fore replacing any part:
– Hazards and safety provisions during instal-
lation and commissioning, adjustments and
part replacement.
WARNING:
Before carrying out any replacement pro-
cedure, activate all the safety devices pro-
vided and decide whether staff at work and
those in the vicinity should be informed.
In particular, turn off the gas supply tap and
prevent access to all devices which might
cause unexpected health and safety haz-
ards if turned on. If work parts have to be re-
placed, use original spare parts only.
REPLACING THE TOP BURNER NOZZLE Ø 80 4 KW
To carry out this operation, proceed as follows.
Turn off the gas supply
)
tap.
Remove the grid (A).
)
Extract the burner (B).
)
Unscrew the nozzle (C)
)
and replace it with the
one suitable for the type
of gas in use (see table at
back of manual).
Replace the burner and
)
the grid.
3320060_inst_GB_rev.4
REPLACING PARTS
A
The manufacturer declines all responsibly
for injury or damage to components due
to the use of non original parts, or extra-
ordinary work on the appliance which may
modify the safety requirements without the
manufacturer's authorisation.
When ordering components, follow the in-
structions provided in the parts catalogue.
B
ENGLISH
8
C
17