SilverCrest 379523 2110 Mode D'emploi page 24

Malfunction
The milk does not froth.
The pump stops during
operation, the "Espres-
so" control lamp t
flashes.
All lamps 5 t z flash
simultaneously.
Disposal of the appliance
The adjacent symbol of a crossed-out dustbin means that this appliance is subject
to Directive 2012/19/EU. This directive states that this appliance may not be
disposed of in the normal household waste at the end of its useful life, but must
be taken to specially set-up collection locations, recycling depots or disposal
companies.
The disposal is free of charge for the user. Protect the
environment and dispose of this appliance properly..
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
The product is recyclable, subject to extended producer responsibility and is
collected separately.
SEM 1100 D3
Cause
• The milk is not cold enough.
• The milk frother 0 is dirty.
• The pump stops after about 3
minutes of operation to prevent
overheating.
• The temperature for the prepa-
ration of a perfect espresso is
too high.
Solution
• Use milk from the
refrigerator.
• Clean the milk frother 0.
• Allow the appliance to
cool down before you
use it again.
• Wait until the machine
has cooled down and the
"Espresso" control lamp
t lights up continuously.
GB │ IE │ 21 ■